* The footage and photos on this page were shot with the DJI Mini 5 Pro by professionals who observed local laws and regulations, and edited to varying degrees in post-production. Use them as a reference only; results can differ. Obey local laws and regulations before every flight, and make sure the drone has the certifications and airspace authorizations it needs.
** Figures on this page were gathered by testing a production DJI Mini 5 Pro in a controlled environment. What you experience depends on your environment, how you use it, and the firmware.
*** Product visuals on this page, including images, video and screen displays, are for illustration. Actual appearance (such as look, color and size) and screen content (such as backgrounds, UI and illustrations) can vary.
1. Complete the required procedures and follow local laws and regulations when you use this product in other countries or regions.
2. Use ActiveTrack 360° in open areas where possible. For scenarios it doesn't support, or that could interrupt recording, check the user manual. Around many obstacles, be careful with Auto mode for the safety of the flight and everyone nearby.
3. For nightscape omnidirectional obstacle sensing to work, the surroundings need visible texture and enough light. Around and above the drone, surfaces should be textured and lit above 1 lux. Below it, the ground should be textured, diffusely reflective (reflectivity above 20%, such as walls, trees, or people), and lit above 1 lux. Avoid severe weather (winds of 12 m/s or more, snow, rain, lightning, fog), altitudes of 6000 m or more above sea level, and temperatures under -10° C (14° F) or over 40° C (104° F). Never launch from a moving platform such as a car or boat, and stay away from water or snow surfaces that reflect light. If you ignore these limits, the vision system may not work correctly. Dim conditions can also limit the vision system. Fly carefully and keep the drone out of Attitude mode. Magnetic and radio interference can disturb flight, so avoid places near Wi-Fi hotspots, routers, Bluetooth devices, high-voltage lines, big power transmission stations, radar, mobile base stations, and broadcast towers. When taking off in a desert or on a beach, keep sand out of the drone. Fly in open areas, away from crowds. Buildings, mountains, and trees can block GNSS and affect the compass.
4. Memorizing flight paths requires textured surfaces around and above the drone that are lit above 10 lux, and textured, diffusely reflective ground (reflectivity above 20%, such as walls, trees or people) that is lit above 10 lux. When launching from a balcony, leave at least 2 × 2 meters of clear space and keep the height under 30 meters above ground, so the return home stays safe. If the drone hits its altitude limit while climbing around obstacles, it holds that height.
5. Test conditions: the drone flew forward at a steady 21.6 kph with no wind at sea level, with Obstacle Avoidance Action set to Brake and the camera in photo mode, until low voltage forced a landing. Treat the figures as a guide only, and heed the app's prompts on every flight.
6. The Intelligent Flight Battery Plus isn't sold in Europe and shouldn't be used there. Always check and follow local laws and regulations before flying.
7. Test conditions: the drone flew forward at a steady 25.2 kph with no wind at sea level, with Obstacle Avoidance Action set to Brake and the camera in photo mode, until low voltage forced a landing. Treat the figures as a guide only, and heed the app's prompts on every flight.
8. Test conditions: outdoors, in open space, free of interference, and compliant with FCC rules. The numbers describe the farthest one-way, non-return range. Heed the prompts in the app on every flight.