What to Do When the Power Goes Out: A Guide to DJI Home Backup Power
Power outages happen when you least expect them — a summer storm, a grid failure, or a rolling blackout. Having a backup power station at home means your refrigerator stays running, your devices stay charged, and you're not scrambling in the dark. Here's how to figure out which DJI power station makes sense for your home.
What Actually Matters for Home Backup Power
Before picking a unit, three things are worth thinking through:
- Capacity (Wh) — This determines how long you can run your devices. A refrigerator typically uses 100–200W. The more watt-hours your station stores, the longer it runs before needing a recharge.
- Output power (W) — This determines what you can run at the same time. Some appliances like medical devices, kettles, or air conditioning units draw a lot of power at once. Your station needs to match or exceed that draw.
- UPS mode — This is the feature that makes a power station genuinely useful for home backup. It means the unit switches to battery power automatically when grid power cuts out, with no interruption to connected devices.
Both the DJI Power 1000 V2 and DJI Power 2000 support UPS mode with a 0.01-second switchover — fast enough that most electronics won't even notice the outage.
The Two Options
DJI Power 1000 V2 — Portable Everyday Backup
The Power 1000 V2 is the more portable option. It's designed for users who want reliable backup power without a large, heavy unit. For home use, it covers the essentials: keeping lights on, phones and laptops charged, routers running, and smaller appliances going during a short outage.

Key specs:
- 1,024Wh LFP battery capacity
- 2,600W continuous AC output
- Powers over 99% of common devices
- Fast AC recharge: 0–80% in approximately 37 minutes, full charge in approximately 56 minutes
- Grid, solar, and car charging support
- Expandable up to 11,264Wh with up to five DJI Power Expansion Batteries
- UPS mode with 0.01-second switchover
- SDC port for super-fast DJI drone battery charging
- Remote monitoring and control via the DJI Home app
If your main concern is keeping phones, laptops, a router, and a few lights running through a short outage — and you want something easy to move around or take on a road trip — the Power 1000 V2 covers that well.
DJI Power 2000 — Serious Home Backup
The Power 2000 is built for higher-demand scenarios. With double the capacity and a higher continuous output, it can run refrigerators, medical devices, and other appliances that the Power 1000 V2 can't sustain for as long.

Key specs:
- 2,048Wh LFP battery capacity
- 3,000W continuous AC output
- Compatible with over 99% of household appliances
- Fast AC recharge: 0–80% in approximately 55 minutes, full charge in approximately 90 minutes
- Grid, solar, car, and hybrid recharging support
- Expandable up to 22,528Wh with up to ten DJI Power Expansion Batteries
- UPS mode with 0.01-second switchover
- Ultra-quiet operation at approximately 30dB in Standard Recharge Mode
- Wireless DJI Home app control — no dongle required
- Two full SDC ports
The expandability is worth noting. Starting with a single Power 2000, you can add expansion batteries over time and scale up to days of backup power for essential home circuits — useful for areas prone to extended outages or for anyone who wants longer-term resilience.
Side by Side
|
|
DJI Power 1000 V2 |
DJI Power 2000 |
|
Capacity |
1,024Wh |
2,048Wh |
|
Continuous output |
2,600W |
3,000W |
|
AC recharge (0–80%) |
~37 min |
~55 min |
|
AC recharge (full) |
~56 min |
~90 min |
|
Max expandable capacity |
11,264Wh |
22,528Wh |
|
UPS switchover |
0.01 sec |
0.01 sec |
|
Noise level |
— |
~30dB (Standard mode) |
|
Best for |
Portable backup, short outages |
Home backup, high-draw appliances |
Which One Makes Sense for Your Home?
Choose the Power 1000 V2 if:
- Your main priority is keeping phones, laptops, lights, and a router running
- You want something portable enough to move between rooms or take on a trip
- You live in an area with occasional short outages and don't need to run a refrigerator for hours
Choose the Power 2000 if:
- You need to keep a refrigerator, medical device, or high-draw appliance running
- You want the option to expand capacity significantly over time
- You live in an area with longer or more frequent outages
- You want app control and near-silent operation for indoor use

A Note on LFP Battery Chemistry
Both units use LFP (lithium iron phosphate) battery chemistry, which is more stable and longer-lasting than standard lithium-ion. LFP batteries are considered safer for indoor home use and handle temperature extremes better — important if you're storing the unit in a garage or basement.
Frequently Asked Questions
Does UPS mode work automatically?
Yes, but you need to set it up first. Connect your devices to the power station, turn it on, and press the AC button until the indicator shows solid light. Once enabled, the Power 1000 V2 and Power 2000 will switch to battery power within 0.01 seconds of a grid outage — seamlessly enough that most electronics won't reset.
Can I recharge with solar panels?
Yes. Both units support solar recharging. The Power 2000 supports up to 1,800W solar input with the DJI Power 1.8kW Solar/Car Super Fast Charger. Solar recharging is useful for extended outages when grid power isn't available.
How long will the Power 2000 run a refrigerator?
A typical refrigerator draws 100–200W. At 2,048Wh, the Power 2000 can run a 150W refrigerator for approximately 10–12 hours on a single charge — longer if expanded with additional batteries.
The next outage won't wait. Shop the DJI Portable Power Station collection at DJI USA and have backup power ready before you need it.